Simplicity 14E Especificações

Consulte online ou descarregue Especificações para Trituradores de jardim Simplicity 14E. Simplicity 14E Specifications Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
1
®
DESCRIPTION
The Fireye 65UV5 flame scanner is a microprocessor based flame scanner utilizing an ultraviolet
tube-type sensor and an electro-mechanical self-checking shutter mechanism. The Fireye 65UV5
flame scanner incorporates an internal flame relay with a fixed ON/OFF threshold thereby eliminat-
ing the need for an external flame amplifier.
The 65UV5 scanner is available with a one-second or four second flame failure response time
(FFRT) depending on the model selected. The “E” versions are one second FFRT, the non-”E”ver-
sions are four seconds FFRT. The Fireye 65UV5-1004, -1004E flame scanner provides an analog 4
to 20 mA output referenced to flame signal strength.
The Fireye 65UV5 flame scanner is powered from a 24 Vdc power source provided externally and
includes an integral 10-foot (3 meter) cable. A color-coded internal LED indicates flame status and
alarm condition. This can be viewed through a viewing port on the rear cover.
The 65UV5 housing has a NEMA 4X / IP66 rating. The unit is suitable for use in Class 1, Div. 2 haz-
ardous environment groups A, B, C & D or Ex II3 G/D Ex nA IIC T4A.
65UV5 CEX models are wired directly via a terminal rail located within the CEX housing. Suitable
glands must be used to terminate the cable at the housing.
Note: The 65UV5-1000, -1000E scanners became obsolete in 2008, and were replaced by the
enhanced capability of the 65UV5-1004 and -1004E scanners.
APPLICATION
Fireye 65UV5 self-checking scanners are used to detect ultraviolet emissions from fossil fuel flames
such as natural gas, coke oven gas, propane, methane, butane, kerosene, light petroleum distillates
and diesel fuels.
PRINCIPLE OF OPERATION
The 65UV5 scanners use a UV-eye detector. This detector is a sealed, gas filled, UV-sensitive tube
containing two electrodes connected to a source of DC voltage. When UV radiation of sufficient
energy falls upon the electrodes, electrons are released and the inter-electrode gas becomes conduc-
tive, resulting in an electric current flow from one electrode to the other. The current flow starts and
ends abruptly and is known as an “avalanche.”
A very intense source of UV radiation will produce several hundred avalanches or pulses per second.
With less radiation there will be fewer pulses per second. Upon total disappearance of flame, the
detector output ceases. Thus, the presence or absence of pulses is an indication of the presence or
absence of flame; the frequency of the pulses is a measure of flame intensity. When the pulses reach
a sufficient level, the internal flame relay is energized.
65UV5 Simplicity
Integrated Flame Scanner
with Internal Flame Relay
CU-104
FEBRUARY 4, 2015
Vista de página 0
1 2 3 4 5 6 ... 15 16

Resumo do Conteúdo

Página 1 - Integrated Flame Scanner

1®DESCRIPTIONThe Fireye 65UV5 flame scanner is a microprocessor based flame scanner utilizing an ultraviolettube-type sensor and an electro-mechanical

Página 2 - SPECIFICATIONS TABLE

10FIGURE 9. 65UV5-1004 “CEX” INTERNAL WIRING - COLOR CODESELF-CHECK SHUTTER OPERATIONThe 65UV5 self-check shutter mechanism is a powered-open, powere

Página 3

11®FIGURE 10.ALIGNMENT AND ADJUSTMENTThe following procedures are recommended to ensure optimum flame detection and discrimination.Flame discriminatio

Página 4 - SPECIFICATIONS (CEX MODEL)

126. When proper signal is established, manually close off the main burner fuel supply. When burnerflame becomes unstable or is extinguished, the fla

Página 5 - INSTALLATION

13®FIGURE 11.MAINTENANCE1. The control and scanner should be powered at all times (except for repair, cleaning or replace-ment) to reduce any harmful

Página 6 - FIGURE 5

14FIGURE 12.FIGURE 13.Table 5:RECOMMENDED SPARE PARTSPart Number Description4-290-1 UV Tube61-6974 Shutter Assembly002608-001 Flange Gasket002611-001

Página 7 - SCANNER WIRING

15®FIGURE 14.FIGURE 15.A. THROUGH I. ORIFICES .062 DIA TO .5 DIAJ. 34-181 ORIFICE RETAINERK. 35-127-1 (NPT) HEAT INSULATING NIPPLE35-127-3 (BSP) HEAT

Página 8 - 65UV5- 1004, -1004E SCANNER

16NOTICEWhen Fireye products are combined with equipment manufactured by others and/or integrated intosystems designed or manufactured by others, the

Página 9 - SCANNER WIRING - CEX VERSIONS

2FEATURESThe components are contained in a cast aluminum NEMA 4X/IP66 housing sealed with an oil-resis-tant gasket. The quartz lens is a planoconvex

Página 10 - INDICATION LEDs

3®SPECIFICATIONS (non CEX versions)MECHANICAL:Housing Material: Cast aluminum with black polyester powder coat finishHousing Weight: 4 lbs (2kg)Envir

Página 11 - ALIGNMENT AND ADJUSTMENT

4SPECIFICATIONS (CEX MODEL)FIGURE 2. SIMPLICITY SCANNER in CENELEC HAZARDOUS AREA HOUSING (mounting flange kit ordered separately)NOTE: All models of

Página 12 - DESCRIPTION

5®INSTALLATIONThe best scanner sighting results are obtained when the scanner is aimed so that its line of sight inter-sects the burner center line at

Página 13 - MAINTENANCE

64. Mount scanner sight pipe by either:— Centering a Fireye No. 60-1664-3 (NPT) or 60-1664-4 (BSP) swivel mount over the holeand installing the sight

Página 14

7®FIGURE 6.SCANNER WIRINGNon-CEX versions of the 65UV5 scanner include an integral 10-foot (3-meter) cable. A four con-ductor cable is provided for th

Página 15 - FIGURE 14

8FIGURE 7. SCANNER WIRING FOR 1000 AND 1000E SCANNER VERSIONSFIGURE 8. SCANNER WIRING FOR 1004 AND 1004E SCANNER VERSIONS65UV5-1000 (E) SCANNERFLAMES

Página 16 - WARRANTIES

9®Note: When the older generations of 65UV5-1000 or -1000E scanners are used for a Class 1, Div. 2application, the cable gland MUST be removed and rep

Comentários a estes Manuais

Sem comentários